![]() The value is an integer in the range from 1 to 1000. The system stops capturing packets after the specified number of packets are captured. Specifies the number of packets to be captured. The value is an integer in the range from 1 to 300, in seconds. The system stops capturing packets after the specified timeout interval expires. Specifies the timeout interval for capturing packets. The value of file-name is a string of 5 to 63 characters. terminal: Displays captured packets on a terminal.file file-name: Saves captured packets to a file.Indicates the mode in which captured packets are stored: Only the S5720EI, S5720HI, S5730HI, S6720EI, S6720HI, S6720S-EI, and modular switches support this parameter.ĭestination * The value is an integer in the range from 1 to 4094.Ĭaptures packets with a specified inner VLAN ID. ipv6-acl: The value is an integer in the range from 2000 to 3999.For other fixed switches, the value is an integer in the range from 2000 to 4999. ipv4-acl: On the S5720EI, S5720HI, S5730HI, S6720EI, S6720HI, S6720S-EI, and modular switches, the value is an integer in the range from 2000 to 5999.For other fixed switches excluding the S5720EI, S5720HI, S5730HI, S6720EI, S6720HI, and S6720S-EI, the destination IPv6 address cannot be specified in an ACL6 rule. ![]() The specified ACL or ACL6 and the corresponding rules must have been created. The interface must exist on the switch and cannot be a management interface.Ĭaptures packets matching a specified ACL or ACL6. interface-numberspecifies the interface number.interface-type specifies the interface type.Interface interface-type interface-numberĬaptures packets on a specified interface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |